WG Gabion Cage

Gabion Cages are wire containers made of hexagonal wire netting. Wire diameter varies with the hexagonal nettings. For hexagonal wire netting with no pvc coating, the wire diameter ranges from 2.0mm to 4.0mm. For those PVC coated hexagonal wire netting, the outside diameter ranges from 3.0mm to 4.0mm. The wire of the outside frame edge is one wire gauge thicker than the wire used for hexagonal wire netting.

  • Features: Economic. Just fill the stone into the gabions and seal it.
  • Simple installation. No special technology needed.
  • Weather proof under natural destroy, corrosion resistant.
  • No collapse even under big scope of deforming.
  • Sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment.
  • Good permeation can prevent the damage by hydrostatic.
  • Less transport freight. It can be folded together for transport and further installation.



1. Heavily Galvanized Gabions

Wire shall be to BS 1052/1980 "Mild Steel Wire", having an average tensile strength of 38-50 kg/mm2 before PVC coating and fabrication of the netting.

Wire shall be Heavily Galvanized to BS 443/1982 "Galvanized Coating on Wire", that is to say the minimum weight of zinc coating shall be according to the table below:

Wire sizes and minimum weight of Zinc Coating:
Selvedge Wire 3.4mm 275g/m2
Mesh Wire 2.7mm 260g/m2
Binding Wire 2.2mm 240g/m2

When the wire is wrapped six times around four wire diameter size mandrell, the zinc coating shall not flake or crack to the extent that any Zinc can be removed by rubbing with bare fingers.

2. Heavily Galvanized and PVC Coated Gabions
  In addition to heavy galvanizing as described, the wire shall be have extruded onto it a coating of poly vinyl chloride, otherwise referred to as PVC. The coating shall be grey in colour, shall nowhere be less than 0.40mm in thickness and shall be capable of resisting deleterious effects of naturals weather exposure, immersion in salt water and shall not shown any material difference in it's initial characteristics.

The maximum penetration of corrosion of the wire core from a square cut end shall not be greater than 25mmwhen the specimen has been immersed for 2000 hours in a 50% solution of HCL (Hydrochloric Acid 12BE).

Type 1

Size: 1 x 1 x 2m
Wire Diameter: 2.2mm before pvc coated & 3.2mm after pvc coated.
Edge Wire Diameter: 3.7mm after pvc coated.
Mesh Size: 80 x 100mm
Weight: 14.1KG/set
Material: Low carbon iron wire, electro galvanized before pvc coated (grey)

Type 2

Size: 1 x 1 x 2m
Wire Diameter: 2.7mm before pvc coated & 3.7mm after pvc coated.
Edge Wire Diameter: 4.4mm after pvc coated.
Mesh Size: 80 x 100mm
Weight: 19.8KG/set
Material: Low carbon iron wire, electro galvanized before pvc coated (grey)